Concrete cutting in Galt CA - clean, marked cuts that stay clear of the steel inside
Need a bad section of slab out, a hole through it or a straight edge for new work? We mark, cut and clean up.
How do you get concrete cut cleanly in Galt?
Concrete cutting in Galt means sawing, breaking or coring an existing slab or wall so you can take out a failed section, open a path for new work or get a clean, straight edge to pour against. We do it for homes in Galt and the cities around it in Sacramento and San Joaquin counties, inside city limits and out in the county.
Usually it starts with a cracked or sunken piece of driveway you want gone, a pipe or doorway that needs a way through a slab, or a patio that needs a squared-off edge before you add on. The price moves with how long and deep the cut runs, how thick the slab is, whether there's steel inside, whether the cut is indoors or out and how much concrete has to be broken out and hauled away. The schedule mostly turns on finding out what's in the slab, getting the lines marked and sorting out any permit, so we check whether your address falls under the city or the county and handle the paperwork when one's required. Your written estimate lays out what goes into your job, so you're not guessing.
- Licensed and insured.
- Free in-person estimates.
- We respond within 1 business day.
Concrete cutting, driveways and patios
What our concrete cutting work involves
Before we cut, I want to know what's inside the slab and exactly where the cut needs to go, so I ask whether you have plans or scan results for it. One equipment maker says a radar scan before any cut, core or drill locates the rebar, the steel bars that hold a slab together, along with post-tension cable and anything else buried in there. That matters most in a post-tension slab, where tight steel cables are anchored at the edges and change depth as they cross the slab, so the depth at one spot tells you little about the next. Then we mark the cut with you right on the concrete, set up the saw, make the cut and break out what has to come out. We keep the slurry, the gray paste of water and concrete dust the blade throws off, contained and clean it up instead of letting it wash to the street, which is what a California stormwater handbook advises too.
Most cuts are the first step of something bigger. When a cracked section has to go, we cut it out on a straight line and pour a new concrete driveway section against it, with the base underneath dug out and packed, because that hidden work is what decides how long the new concrete stays flat. When an old slab needs reshaping or squaring off, the cut gets it ready for concrete patio construction, and planning the cut and the pour together means the edges meet where you want them.
Why Galt homeowners call Galt Concrete to cut a slab
The owner estimates and works it
I started Galt Concrete in 2023, and I'm the one who comes out to write your estimate and then works the cut alongside our crew. The person who heard what you need is standing there when the blade goes in.
Cut lines checked before anything
I learned under a foreman who made us reset a form if the string line was off by a hair, and I hold a cut line to that same standard. A saw cut can't be put back, so the line gets checked before the blade touches the concrete.
City or county, we check first
We work inside Galt's city limits and out in the county, so we find out which office your address falls under and talk with them about what the cut needs. When a permit is required, we handle the paperwork so the saw doesn't show up before the approval does.
Licensed and insured on your property
We're licensed and insured. Cutting concrete at your house is heavy work with real risk, and that coverage should be in place before anyone starts the saw.
On a cut, what matters most is knowing what's in the slab and agreeing on the line before the blade goes in. When you're ready, send us the details or call (209) 865-3675.
Get a written estimate for your concrete cut
Send the form and we'll get back to you within one business day. I'll come out, look at the slab and where you want it cut, and write up a free estimate with no obligation.
- Licensed and insured.
- Free in-person estimates.
- We respond within 1 business day.
What happens after you call about a concrete cut in Galt?
Call or send the form
Call (209) 865-3675 or use the form, and tell us where the cut goes, whether it's a slab or a wall and whether you have plans or scan results. We pick up Monday to Friday from 6 AM to 11 PM and weekends from 8 AM to 9 PM.
I look at the concrete
I come out, look at the slab and what's around it and ask what the cut is for. You get a written estimate that shows what goes into the job, so you can compare it and decide without guessing.
Permits sorted, lines marked
If you go ahead, we sort out any permit with the right office before we schedule the cut. Then we mark the cut lines with you, so there's no question later about where the blade went.
We cut and clean up
We cut, break out what needs to come out and clean up the slurry and debris before we leave. If new concrete goes in afterward, I walk you through curing, the days it needs to harden before you use it, and how to care for it.
Concrete cutting questions from Galt homeowners
How much does concrete cutting cost per foot in Galt?
Across the US, professional concrete cutting usually costs about $3 to $10 per linear foot of cut. Where your job lands depends on how thick the slab is, whether there's steel inside, whether the cut is indoors or out and how much concrete gets broken out and hauled. I'll write up your own figure once I've seen the slab.
How do I decide where concrete gets cut on my slab?
You settle it before the saw starts, and under one industry specification the owner or hiring contractor approves the cut area and has every line clearly marked first. That same party decides whether over cuts, where the blade runs a little past a corner, are allowed, so agree on who handles those calls before work begins. We walk the lines with you and mark them together.
Do I need a permit to cut concrete in Galt, CA?
Ask the city's Building Division about your specific cut, since it issues Galt's building, plumbing, mechanical and electrical permits, and any construction or digging in a city street or right-of-way needs an encroachment permit. If the cut touches the sidewalk in front of your house, the city makes the property owner next to it responsible for its upkeep, and you can request an encroachment permit for sidewalk repairs at no cost through Public Works. A building permit valued over $20,000 may also call for an encroachment permit, and we check with the right office and handle the paperwork when one's required.
What license should a concrete cutting contractor have in California?
California's Contractors State License Board lists concrete sawing, breaking and coring under its D-6 concrete related services class. Anyone altering a structure needs a state license when the job needs a building permit, uses employees or totals $1,000 or more, so ask any crew about their license before they start.
Can you cut concrete inside a garage or house?
Yes, but the saw has to suit the space, because gas-powered hand saws are normally kept for outdoor jobs on account of their exhaust. Other hand saws run on hydraulics, compressed air or electricity, so for an indoor cut, ask which power source the crew plans to use.
What is the best way to deal with dust from cutting concrete?
Start by asking the crew how they'll keep it down, because concrete dust contains respirable crystalline silica, a known cause of cancer and of silicosis, an incurable lung disease. Cal/OSHA sets standards to control how much of it workers are exposed to, and I'll go over how we'll handle it for your cut at the estimate.
Work that often follows concrete cutting
Concrete driveway building
When cracks and sinking run through most of the slab, a new driveway on a properly packed base may make more sense than patching.
Concrete patio construction
Trimming a cracked edge or squaring off an old slab often comes right before a bigger patio goes in, so it helps to plan both at once.