Concrete Contractor in Florin, CA - Slabs Built on a Base That Holds
Galt Concrete is a concrete contractor based in Galt, CA, and we build driveways, patios, garage floors and slab foundations for Florin homeowners, with the owner on every job and the base dug out and packed before the pour.
Florin: older slabs on county streets
Florin is a community in Sacramento County just south of Sacramento, with established residential streets, some newer homes mixed in, and businesses along the main roads. The county's Florin-Vineyard plan area runs east toward Bradshaw Road and north to Elder Creek Road, and out that way the lots get bigger, much like neighboring Vineyard. The historical society's museum is a good reminder that families have been here a long time, and a lot of the driveways and patios we see were poured a generation or two ago.
That age shapes the job. An old slab usually has to be broken out before anything new goes down, and what's under it, whether that's a thin base, roots or old fill, is something I can only judge once it's open, so I tell you up front what could change when we get there.
- Licensed and insured.
- Free in-person estimates.
- We respond within 1 business day.
Concrete work we do in Florin
Concrete driveway building
Many Florin driveways are old enough to crack, sink or pool water by the garage. We tear them out, dig and pack the base, then pour.
Concrete patio construction
Back patios on these older lots often settle unevenly or tip water toward the house. We slope the new slab away from your walls before we pour.
Garage floor concrete
Garage floors in older Florin houses tend to be chipped, cracked or dusty on top. Our garage floor concrete work starts with the base under the old slab.
Concrete sidewalk building
Worn walks to the front door heave and trip people as they settle. We replace them and cut grooves so any crack follows a line we chose.
Slab foundation building
Larger lots out here often fit a shop or addition that needs a new slab. We dig out, form, set the steel rebar that ties it together, and pour.
Concrete cutting
Plenty of homes here need a slab opened for new plumbing or a clean edge where new concrete meets old. We saw-cut it so the rest stays whole.
Working in Florin: county permits and what moves the price
Florin isn't its own incorporated city. It's a community in Sacramento County, so building permits here go through the county's Division of Building Permits and Inspection, not a city hall. That office's list of typical permits names roofs, decks, water heaters and remodels, not driveways or patios, so I check your address and talk with the county about what your job needs before we set a pour date, and if a permit is required we handle the paperwork, which can add review time to the schedule. Two things are worth checking on anyone you hire: a state contractor license from the Contractors State License Board, which means the holder passed both a law and business exam and a trade exam, and, for a business based out in the unincorporated county, the county's General Business License, since operating without one is a misdemeanor with a fine of up to $500.00. We're licensed and insured.
Most of what moves the price is what's under and around the old concrete: how much has to be broken out and hauled off, how much base we dig out and pack, how close the truck can get on your lot, and whether you want a plain broom finish, the light texture that gives shoes and tires grip, or something stamped. The schedule turns on the permit question, the weather on pour day, since we pour early so midday heat doesn't leave a weak top, and the curing wait, the days a slab needs to harden before you use it. Florin is a short run up Highway 99 from Galt, and we do the same work in Lemon Hill and Elk Grove, so bringing the crew and forms out here is routine. Your written estimate spells out each of those pieces for your job.
Get a written estimate for your Florin concrete job
Send the form or call (209) 865-3675, and we'll reply within one business day to set a time. I'll come out to your Florin property myself, look at the old concrete and the ground, and write up a free estimate so you can see what goes into the job. There's no obligation and no pressure to book.
- Licensed and insured.
- Free in-person estimates.
- We respond within 1 business day.
Concrete work for Florin homes
Concrete questions from Florin homeowners
Do I need a permit to pour a concrete driveway in Florin?
Maybe, and the county's building permits division is who can tell you, since its list of typical permits doesn't settle driveways one way or the other. I check with them on your address and your job before we schedule a pour. When a permit is required we handle the paperwork, including any plans, which the division only accepts electronically.
How much does a new concrete driveway cost in Florin?
It comes down to the driveway's size, how much old concrete has to come out, how much base work the ground needs and the finish you pick, so I give you a number only after I've seen it. If the budget's tight, I'd rather keep the base work and go plainer on the finish, because nobody sees the base on day one, but a nice surface over a weak base is the slab that sinks and cracks later. The estimate is written out so you can see where the money goes.
How do I find out if my Florin property is in a flood zone?
Call Sacramento County's Flood Zone Hotline at (916) 874-7517, which answers that for parcels in the unincorporated county. The county's map information service can also give you Base Flood Elevations and a copy of an elevation certificate if one is on file. It's good to know before we plan a slab foundation or an addition, so bring it up at the estimate.
How much can a contractor ask for as a down payment in California?
No more than $1,000 or 10 percent of the contract price, whichever is less, under the state licensing board's rules for home improvement work. Every payment after that has to be spelled out in the contract and tied to work done or materials delivered. If someone wants a big check before anything shows up at your house, that's a reason to ask questions.
How long does new concrete need to cure before I can drive on it?
Longer than you'll wait to walk on it, because concrete keeps gaining strength for days after the pour, and a car on it too soon is how edges break. That wait is called curing, and the mix and the weather both change it. I'll tell you on pour day when you can walk on your slab and when you can park on it.
What causes new concrete to crack, and can you stop it?
Most cracks come from a base that was raked flat instead of dug out and packed, or from joints that were cut late or skipped, because concrete shrinks as it dries and moves when the ground under it moves. We dig out and pack the subgrade, the ground and gravel the slab sits on, and we cut control joints, grooves that give the slab a planned place to crack, on time. Nobody can honestly promise a slab won't crack, but done this way the cracks that do show up tend to stay in the joints.