Concrete Contractor in Wilton, CA - Driveways and Slabs Built on a Packed Base
Galt Concrete is a concrete contractor based in Galt, CA. We pour driveways, patios, shop slabs, footings and foundations for homeowners across Wilton, and we dig out and pack the base before any concrete goes down.
Wilton: big lots, long runs of concrete
Wilton is country living in Sacramento County, a short drive from our base in Galt and from Elk Grove. Most of what we see out here are homes on acreage, with a shop or barn set back from the house, horse fencing along the edges and a driveway that runs a long way in from the road. Plenty of those driveways started out as gravel. The calls we get are usually about paving one, pouring a slab for a new building or replacing a patio that has sunk or cracked.
The ground is mostly flat and open, so rain tends to sit instead of running off, and the pour can be a long way from where the truck parks. That's why we look at the soil under the slab, the way water crosses the lot and the route to the pour before we set a single form.
- Licensed and insured.
- Free in-person estimates.
- We respond within 1 business day.
Concrete work we do in Wilton
Concrete driveway building
Wilton driveways often run a long way from the road, so the base under them matters. We dig out soft dirt and pack a firm base the whole length.
Slab foundation building
Wilton acreage leaves room for shops and guest houses that need a solid floor. We handle slab foundation building for them, with forms set square and level.
Concrete footings
Carports, pole barns and horse shelters here sit on footings, the buried concrete pads that carry the posts. We dig each one down to firm ground.
Garage floor concrete
Detached garages and shops on Wilton lots hold tractors, trucks and heavy tools. We plan the thickness and the rebar, the steel inside the slab, for that weight.
Concrete patio construction
Big back patios out here sit on flat ground where rain lingers. We slope each slab away from the house so the water heads out to the yard.
Concrete sidewalk building
Walks from the driveway to the door run long on big lots. We pack the base and cut control joints, the grooves that decide where cracks go.
Working in Wilton: county permits and long driveways
A Wilton property in unincorporated Sacramento County gets its building permits and inspections from the county's Building Permits and Inspection Division, not from a city hall. Before anything else I check which office your address falls under, talk with them about what your job needs and handle the permit paperwork when one is required. When a permit is part of the job, the county's review and inspection come before the pour, so I build that wait into the schedule I give you instead of guessing at a date. We're licensed and insured, and I'm on the job with our crew from the forms to the cleanup.
Out here, the price and the schedule turn on what's under the concrete and how far it has to go. Length and thickness, how much soft dirt we dig out and how much base we bring in and pack, old gravel or concrete to haul off, and whether a long lane or a narrow gate keeps the mixer truck from reaching the pour all move the number. When a budget's tight, the first thing people want to cut is the base, because nobody sees it on day one. I'd rather go with a plain broom finish, the light texture that gives tires and shoes grip, and keep the base, since a nice top on soft ground still cracks. Weather and curing set the rest of the timeline, and the written estimate I make after walking your property spells out what goes into your job. We do the same work in August, and acreage there raises the same questions.
Get a free written concrete estimate for your Wilton property
Send the form or call (209) 865-3675, and we'll reply within one business day to set a time. I'll come out to your Wilton property myself, look at the ground and where the water goes, and write out a free estimate so you can see what goes into the job. There's no obligation and no pressure to book.
- Licensed and insured.
- Free in-person estimates.
- We respond within 1 business day.
Concrete driveways and slabs for Wilton homes
Concrete questions from Wilton homeowners
Do I need a permit for a concrete driveway in Wilton, CA?
Sacramento County's own list of work exempt from a building permit includes driveways and sidewalks. Zoning limits can still apply to work on that list, so we check your address with the county before we set a form.
Does a concrete retaining wall need a permit in Wilton?
On the county's list, a retaining wall no taller than 4 feet, measured from the bottom of the footing to the top of the wall, needs no building permit unless it's holding back extra load, like a driveway or a slope above it. A taller wall, or one carrying that kind of load, goes by the county's separate guideline for walls, and I'll go over it with them before we dig the footing.
How do I get a permit for a shop slab or foundation in Wilton?
Plans go to Sacramento County's building permits and inspection division electronically, because it takes submittals online only, for small projects and large ones alike. Anything submitted now is reviewed under the 2025 California Building Standards Code, which applies to everything submitted since January 1, 2026. We handle that paperwork when your job needs it, and the county's public line is 916.875.5296 if you'd like to check on something yourself.
How much does a concrete driveway cost in Wilton, CA?
The cost comes down to how much concrete the run takes and how much work goes under it, so I give you a figure once I've walked your driveway. Long country driveways use more concrete than a short city one does, and if the truck can't reach the far end, a pump adds to the cost. Old gravel or concrete to remove and soft ground to dig out add to it too, and the written estimate shows each part.
How long does a new concrete driveway take before I can drive on it?
You can walk on a new driveway well before you can drive on it, because the concrete keeps gaining strength for days while it cures, the slow hardening it needs before it can take weight. Hot Wilton afternoons dry the top faster than the inside, so we pour early in the day and keep the slab damp. I'll tell you the walking and driving days for your slab based on the mix and the weather that week.
What causes concrete to crack and sink on Wilton properties?
Most cracking and sinking starts under the slab, when the subgrade, the dirt it sits on, was raked level instead of dug out and packed, or when water gets under it and softens the ground. On flat lots, water doesn't always have somewhere to go, so we check where it runs before we form, pack a firm base and cut control joints on pour day. Concrete still cracks a little, and the joints are there so it cracks in a straight line we chose.